Publicité
Information
A. By Master/Slave built-in program function.
By linking the units in master/slave connection, the first unit will control the other units to
give an automatic, sound activated, synchronized light show. This function is good when
you want an instant show. You have to set the first unit in Automatic, sound activated mode.
Its DMX input jack will have nothing plugged into it. The other units will have to select
SLAV , Their DMX cables plugged into the DMX input jacks (daisy chain) and the slave led
lights will constantly on.
B. By universal DMX controller
Using universal DMX controller to control the units, you have to set DMX address from 1
to 512 channel so that the units can receive DMX signal.
Press the MENU, then find Addr, press ENTER, when the 1 is showing on the display.
Pressing ENTER. Use DOWN and UP button change the DMX512 address.
C
temp
Send
Info
ver
VVxx
temp
XX C
30
continuously, with a factory default of 10
seconds
60s
on
50-65
Set the protection temperature within the
range of 50-65 degrees Celsius, and the
lamp will begin to reduce power if it
exceeds the set temperature
yes
One click to set the channel mode of all
lighting fixtures to the current master
Send
channel mode
Soft version
Current lamp panel temperature (℃)
10
Publicité
