Publicité
Before you start / Safety
GB-IE
YOU WILL NEED
SAFETY
GB-IE
BEFORE STARTING, READ THROUGH THE ASSEMBLY INSTRUCTIONS CAREFULLY.
CHECK THOROUGHLY ALL THE PARTS YOU HAVE RECEIVED AGAINST THE PARTS DIAGRAMS
PAGES 1-3.
ENSURE THAT NO PARTS ARE DAMAGED.
ALWAYS ASSEMBLE THE ROOF FIRST, ESPECIALLY IF YOU DO NOT INTEND TO COMPLETE
CONSTRUCTION ON THE SAME DAY.
DO NOT ERECT YOUR BUILDING ON A WINDY DAY. ANY
BUILDING LEFT PARTIALLY CONSTRUCTED MAY BE
DAMAGED.
ALL ASSEMBLY OPERATIONS MUST TAKE PLACE ON A
LEVEL SURFACE.
WASHERS TO BE USED ON ALL SCREWS
THE SHED SHOULD BE SECURELY ANCHORED TO A
FIRM LEVEL BASE EG CONCRETE, PAVING SLABS OR
WOOD. CONCRETE SHOULD BE LAID A MINIMUM OF
75MM THICK AT APPROX. 25MM ABOVE GROUND LEVEL.
A SHEET OF HEAVY DUTY POLYTHENE PLACED UNDER
THE BASE AREA WILL HELP PREVENT DAMPNESS
RISING FROM THE GROUND INTO THE SHED.
IT IS RECOMMENDED THAT YOU WEAR GLOVES WHEN ASSEMBLING THIS PRODUCT
TWO PERSON OPERATION
KEEP CHILDREN AWAY DURING ASSEMBLY
2
Publicité
