Publicité
EN
5.MAINTENANCE
• Water deposit full ( ). The symbol lights up to indicate that the deposit to collect
water from hand drying is almost full and needs to be emptied and cleaned. To
do so, please follow the instructions in section 6 EMPTYING AND CLEANING THE
DEPOSIT.
•HEPA filter.
Warning to replace HEPA filter.
To do so, release the clamping cover of the filter located at the bottom.
Spin the bolt 90° to remove the filter. Before installing the new one,
press 2 seconds the button located in the indicated area to reset the warning.
Installation screws
HEPA filter cover
spin 90°
Press 2 s
to restart
• Motor brushes (3). Warning that the motor brushes are reaching the end of
their useful life. It will soon be necessary to replace them. After the replacement,
it is necessary to reset the motor counter following the instructions stated in this
section.
• Jofel logo (flashing). The 30-second programmed operating cycle for hand
drying has finished. If the sensors detect a static object for a period of over 30
seconds, the device will automatically stop.
HEPA filter
Pag.12
Water deposit
Publicité
