of Ooma, Inc. Other company and product names mentioned herein are trademarks of their respective companies. Mention of third-party products is for informational
purposes only and constitutes neither an endorsement nor a recommendation. Ooma assumes no responsibility with regard to the performance or use of these products.
Page 2
Welcome to Ooma Home Security Installation is easy! Congratulations on purchasing the Ooma Telo Base Station, your hub for Ooma Home Security. Installation is easy and will take only about 15 minutes. Follow the steps in this guide to set up your Base Station, then log into your account to visit our web store and choose the Home Security sensors that are right for your home.
Page 3
Step 2 The Ooma Home Security app will be the main tool you use The Ooma Home Security app will guide you through the process of activating your to control your home security system. You will use it now to Ooma Telo Base Station.
Page 4
Base Station to an open Ethernet port on your router. the lights on the Base Station to blink for a couple of minutes while it boots up. The Ooma logo will light up blue once the device is ready to be used.
Page 5
Pair Sensors with your Base Station and Configure Home Security Settings Step 4 If you have already purchased one or more Ooma Home Security sensors, you can now pair them with your Base Station. Modes Use the Account ID and password you created during the activation process to log into the app.
Page 6
You can choose to upgrade your Ooma account to Ooma Home Security sensors connect to the Base Station wirelessly from up to 200 feet away (depending on include Internet based home phone service at any time. the thickness of your home’s walls and floors). The sensors can be easily mounted using the included fasteners.
Page 7
• Verify that you have activated your device as • If the Ooma logo on the Base Station is blue, try rebooting Indicates your Ooma service is not working. described on Page 4. If you plugged in your device the Base Station by unplugging the power, waiting All services are unavailable.
Page 9
à domicile Ooma Installation facile! Félicitations pour l’achat de l’unité de base Ooma Telo, votre pivot pour la sécurité à domicile Ooma. L’installation est facile et ne vous prendra que 15 minutes environ. Suivez les étapes du présent guide pour configurer votre unité...
Page 10
L’application de sécurité à domicile Ooma vous guidera dans le processus d’activation de L’application de sécurité à domicile Ooma sera le principal votre unité de base Ooma Telo. Vous devrez fournir votre adresse 911 et vos informations de outil que vous utiliserez pour contrôler votre système de facturation.
Page 11
Le logo Ooma s’allume en bleu lorsque l’appareil est prêt à être utilisé. Prise électrique Si votre unité de base a besoin d’une mise à niveau logicielle, le logo Ooma clignotera en mauve pendant que l’unité télécharge la version la plus récente. Cela pourrait prendre entre 5 et 10 minutes.
Page 12
Étape 4 Jumelez les détecteurs à votre unité de base et configurez les paramètres de sécurité à domicile Si vous avez déjà acheté un ou plusieurs détecteurs de sécurité à domicile Ooma, vous pouvez Modes maintenant les jumeler avec votre unité de base.
Page 13
Voici un aperçu des détecteurs actuellement offerts. Pour plus de détails, visitez www.ooma.com/home-security. Les détecteurs de sécurité à domicile Ooma se connectent sans fil à l’unité de base dans un rayon de 61 m Vous pouvez choisir à tout moment de mettre à...
Page 14
Tous les services sont fonctionnels. Ooma clignote rouge pendant quelques minutes lors du • Si le logo Ooma sur l’unité de base est bleu, essayez de démarrage. Sinon, vérifiez les éléments suivants afin de vous redémarrer l’unité de base en la débranchant, en attendant assurer que tout est correctement configuré...