Publicité
Smart home devices
USER MANUAL
Manufacturer and importer:
IMMAX, Pohoří 703, 742 85 Vřesina, EU | www.immaxneo.cz |
www.immaxneo.com Made in P.R.C.
Technical Specifications
Input voltage: AC 230V, 50HZ, 16A, 3680W Max
4xUSB output: DC5V 4.8A Max, 2.4A Max each
Cable: 3 x1.5 mm2 , 1.5 meters
Wi-Fi Standards: 2.4GHz 802.11 b/g/n
Frequency: 2412MHz-2472MHz
Max RF output power:
802.11b: +18dBm, 802.11g: +16dBm, 802.11n (20MHz): +14dBm
In-App Functions: ON/OFF, Timer, Countdown, Power
Measurement Voice Support: Amazon Echo, Google Home
Dimensions: 360 x 59.5 x 47mm
Certification: CE, RoHS
1. The body of the smart extension cable
2. USB ports
3. Sockets
4. On/Off button
5. Extension cable with end cap
HOW TO RESET THE SMART SOCKET?
1. Press the reset button for 6 seconds until the LED indicator flashes rapidly.
The smart socket is switched to basic pairing mode.
2. Press the reset button again for 6 seconds until the LED indicator flashes
slowly. The device switches to AP mode.
APPLICATION INSTALLATION AND COMMISSIONING
Step 1: Download the app and register
Scan the QR code and download the Immax NEO PRO app. Or search for and
install the Immax NEO PRO app in the Apple Store or Google Play. Launch the
Immax NEO PRO app and tap "Register" to create your own account using your
phone number or email.
When you are done registering, log in with your account.
Step 2.1: Add a device in a simplified procedure (recommended)
Make sure your Immax NEO product is turned on
Make sure your mobile phone is connected to Wi-Fi (the device only supports
2.4GHz Wi-Fi network)
Make sure the device is in pairing mode.
Open the Immax NEO PRO app and click on the "+" in the top right corner of the
app
Select the type of device you want to add, confirm that the "LED light is blinking
fast". Enter the password for the Wi-Fi network to which your mobile phone is
connected.
Confirm the password and wait for the device to be added. The device should
then appear in the product list.
Step 2.2: Add a device in AP mode
Click the "+" in the top right corner of the app and select the correct device type.
Click "AP Mode" on the top right and confirm that the LED indicator is blinking
slowly. Enter the password for the Wi-Fi network your mobile phone is connected
to.
Confirm the password, then connect to the Wi-Fi hotspot on your mobile phone.
Select the Wi-Fi network named "Smart Life_xxx" and connect.
Return to the "Smart Life" app, the connection will then start automatically. Wait
for the device to be added. The device should then appear in the product list.
Step 3: Control your Immax NEO product via the Immax NEO PRO app anytime,
anywhere
Make sure your mobile phone and product are connected to the internet. For more
features, please refer to the Immax NEO PRO app interface.
Safety information
WARNING: Keep out of reach of children. This product contains small components
that can cause suffocation or injury if swallowed.
WARNING: Each battery has the potential to leak harmful chemicals that can
damage skin, clothing or the area where the battery is stored. To avoid the risk of
injury, do not allow any substance from the battery to come in contact with your
eyes or skin. Any battery can rupture or even explode if exposed to fire or other
forms of excessive heat. Use caution when handling batteries. To reduce the risk
or injury caused by improper handling of batteries, take the following precautions:
- Do not use different brands and types of batteries in the same device
- When replacing batteries, always replace all batteries in the device
- Do not use rechargeable or reusable batteries.
- Do not allow children to install batteries without supervision.
- Follow the battery manufacturer's instructions for proper battery handling and
disposal. NOTE: The product and batteries should be disposed of at a recycling
center. Do not dispose of with normal household waste.
WARNING: To ensure safe use of the product, wiring must be brought to the point
of installation in accordance with applicable codes. Installation must only be
performed by a person with appropriate electrical certification. During installation or
when a fault is detected, the supply cord must always be disconnected from the
socket (in the case of direct connection, the relevant circuit breaker must be
switched off). Incorrect installation can lead to product damage and injury.
WARNING: Do not disassemble the product, electric shock may occur.
WARNING: Use only the original power adapter supplied with the product. Do not
operate the unit if the power cord shows signs of damage. WARNING: Follow the
instructions in the enclosed manual.
Maintenance
Protect the equipment from contamination and pollution. Wipe the device with a soft
cloth, do not use rough or coarse material.
DO NOT use solvents or other aggressive cleaners or chemicals.
A Declaration of Conformity has been issued for this product, for more information see
at www.immax.eu
Publicité
