Publicité
With the top rail (F)frame connected
into a circle, lay it flat on the floor
(either side facing up—they are
identical). Then insert the tapered end
of each of the 6 leg tubes (K) into the 6
leg sockets that are facing up, as
shown. The Curves should all point
out—away from the center of the
trampoline.
Assembly Instructions(Jumping Mat)
NOTE:
CHOKING HAZARD
-Small Parts. Not for children under 3 years.
ADULT ASSEMBLY REQUIRED
-Contains small parts, sharp points and sharp edges.
Lay out the jumping mat (B) in the
center of the frame. Then slide a
suspension cord (C) from left to right
through the sewn-in loop as shown.
Align the screw hole in the leg tube (k)
with the hole in the leg socket. Then
secure with screw and tighten. DO
NOT OVER-TIGHTEN. Repeat this
until all 6 legs are securely attached to
the top rail (F) frame with screws (D).
9
Publicité
