Assembly Instructions
( Safety Enclosure Net )
NOTE:
CHOKING HAZARD
-Small Parts. Not for children under 3 years.
ADULT ASSEMBLY REQUIRED
-Contains small parts, sharp points and sharp edges.
Insert the smaller diameter end of
an upper enclosure pole (H) into the
larger diameter end of a lower
enclosure pole (G) and align screw
holes. (You may need to slide the
pre-installed foam sleeves to gain
access to the ends of poles.)
Insert screw (D) & tighten.
DO NOT OVERTIGHTEN!
Repeat steps 1 & 2 to assemble
remaining 5 sets of upper (H) and
lower (G) poles.Once completed slide
part (J) sleeve from top to bottom over
all 5 assembled poles.
12