Publicité
Use your right hand to stretch the loop
end of the cord (C) OVER the top rail
(F) and your left hand to pull the ball
end of the cord (C) UNDER the top rail
(F), then press the ball through the
loop.
From the 1st attached cord, count around the jumping mat to the 16th loop. Like the
picture show position 1&2. Then repeat step 1 to step 3 to fix the position 3,4,5,6.
Finally fix all the suspension cords (C) evenly. By doing so, it will ensure
even-tension around the entire jumping mat (B).
SLOWLY release the loop end of the
cord so that it captures the knob,
locking the suspension cord (C) in
place, as shown.
10
Publicité
