Publicité
All manuals and user guides at all-guides.com
vPulse user guide
Selecting the right ear tip
Choosing the right ear tips will give you the best possible sound isolation and bass response.
Listen to a song that you know has deep bass. Change the ear tips until you find the smallest size that gives you
the most bass extension.
Be sure to position the ear tips to fit your ears snugly.
Always turn down the volume on your device before inserting the ear tips into your ears. Once the ear tips are
inserted, gradually increase the volume to a moderate sound level.
To change an ear tip
Gently pull on the outer baffle of the attached tip to remove it from the driver tube. Align the new ear tip with the
driver grill and press firmly on the tip until the driver tube is fully covered.
Wearing vPulse
Make sure ear tips are clean before inserting into your ears.
Wear the ear piece marked "R" in your right ear and the one marked "L" in your left ear. The left ear piece is the
one with the control module on its cable.
Using the cord slider
Move the slider up and down to change the split position of the cord. Store vPulse with the slider all the way up to
help reduce cord tangles.
Cleaning
Ear tips should be cleaned regularly for sanitary reasons and to prolong the life of your ear tips.
With a lightly dampened cloth, paper towel or disinfectant wipe, thoroughly clean the ear tips.
Use a dry cloth to pat away any remaining moisture.
4
Publicité
