Publicité
EN
3.3 Accumulation function
3.3.1 Preparation
Before accumulating values, ensure that there is no load on the platform and that the display reads zero.
3.3.2 Accumulation
Place the object to be weighed on the scale and wait until the weight reading has stabilized. By pressing the [ADD]
key, the [ADD n] indication will appear on the screen, where [n] is the amount of times this procedure has been
repeteated.
The total value will only be displayed if you have entered a value for all products.
Place an item on the scale and let the reading stabilize. Once the reading has stabilized, press the [ADD] key. The
price and weight of the product has now been stored. Remove the first product from the scale and place the next
one. Weigh normally and press the [ADD] key again after you have set the value first. The display will show the [ADD
2] indication and will also display the total weight and total value for these two products. You can repeat this
procedure consecutively a total of 99 times.
3.3.3 Clear the accumulated value. You can cancel the accumulation process and clear the accumulated value by
pressing the [C] key.
3.4 Saving the price.
The scale can store up to 8 different prices.
3.4.1 Store the price
Press the [STORE] key and then enter the desired price using the numeric keypad. Press the [M*] key (*=1 to 8) and
the value will be stored in the corresponding [M] slot. If there is already another value stored in that slot then it will
be overwritten with the one you just added.
3.4.2 Load the price from a memory slot
If you want to use the value stored in one of the 8 [M) slots while weighing, simply press the desired [M] key once
the weight reading has stabilized. The value will be loaded and displayed on the value display.
Attention
4.1 Battery
The battery must be properly charged after each use of the scale with battery power. It is generally recommended
to charge for 1.2 hours for every 1 hour of use of the scale. If the battery is not used frequently, then charge it
continuously for at least 24 hours. Observe the correct polarity when connecting the battery. Make sure the
battery is connected correctly before using the device.
CAUTION: Before charging the battery, turn off the scale first.
4.2 Humidity and temperature
Protect the scale from humidity and high temperatures. Do not expose the scale to rain or direct sunlight.
Do not place the scale near humidifiers.
4.3 Magnetic fields
Do not place the scale near magnetic field sources. Magnetic fields can damage sensitive electronic circuits.
4.4 Repair and maintenance.
The scale should only be repaired by qualified service technicians of the manufacturer.
3
WWW.NIKOLAOUTOOLS.COM
Publicité
