Electrolux ERN3001FOW Notice D'utilisation page 5

1.6 Service
• Any electrical work required to do the
servicing of the appliance should be
carried out by a qualified electrician or
competent person.
• This product must be serviced by an
authorized Service Centre, and only
genuine spare parts must be used.
1.7 Environment Protection
This appliance does not contain
gasses which could damage the
2. OPERATION
Temperature indicator LED
1
Shopping Function indicator
2
Shopping Function button
3
Temperature regulator
4
ON/OFF button
2.1 Switching on
Insert the plug into the wall socket.
Touch the temperature regulator button if
all LED are off.
2.2 Switching off
Keep touching the temperature regulator
button for 3 Sec.
All indicators light off.
ozone layer, in either its refrigerant
circuit or insulation materials. The
appliance shall not be discarded
together with the urban refuse and
rubbish. The insulation foam con-
tains flammable gases: the appli-
ance shall be disposed according
to the applicable regulations to
obtain from your local authorities.
Avoid damaging the cooling unit,
especially at the rear near the heat
exchanger. The materials used on
this appliance marked by the sym-
bol are recyclable.
1
2.3 Temperature regulation
To operate the appliance, proceed as fol-
lows:
• touch the temperature regulator button
until the LED corresponding to the re-
quired temperature lights up. Selection
is progressive, varying from 2 to 8°C.
At first button touch actual setting LED
keeps blinking.
Any time the button is touch the set
temperature is moved to 1 position
right. Corresponding LED will blink for a
while.
Touch the setting button until the re-
quired temperature is selected. The set
will be fixed
coldest setting: +2°C
warmest setting: +8°C
A medium setting is generally the
most suitable.
ENGLISH
2
4 3
5