Télécharger Imprimer la page

Burcam 300209C Instructions D'installation page 6

Publicité

TROUBLE SHOOTING GUIDE CHECKLIST
NEVER MAKE ADJUSTMENTS TO ANY ELECTRICAL APPLIANCE OR
PRODUCT WITH THE POWER CONNECTED. DON'T JUST UNSCREW
THE FUSE OR TRIP THE BREAKER, REMOVE THE POWER FROM
THE RECEPTACLE.
TROUBLE
PROBABLE CAUSE
Thermal overcharge
Motor does
not run.
Defective motor
Low water level
Motor does
not deliver to
Jammed impeller
full capacity.
Plugged check valve
Blocked suction/inlet
Blocked line/pipe
Worn impeller
Defective motor
TO THE END CONSUMER
If you have any problems with the product, before advising the store, where you've
purchased the pump, please contact us at 514 337-4415, and ask for our sales
department, and they will be pleased to help you with any questions you might have,
concerning your installation.
6
FOR INFORMATION | TEL : 514.337.4415 | FAX : 514.337.4029
ACTION
Cool the motor
Replace/repair
Add water and verify
Clean
Clean/replace
Check for debris in pit and clean
Check for debris or ice
Repair/replace
Replace

Publicité

loading