Publicité
5 Preparing Charger for Use
4.10 Cleaning, Maintenance and Repair
WARNING
￭ Harsh detergents, cleaning with a water jet or sharp
objects can damage the charger. If the charger is not
cleaned correctly, components may no longer function
properly or safety devices may be rendered inoperative.
They may cause serious injury to persons.
► Clean the charger as described in this User Manual.
￭ If the charger is not serviced or repaired correctly,
components may no longer function properly or safety
devices may be rendered inoperative. This may result in
serous or fatal injury to people.
► Do not attempt to service or repair the charger.
￭ If the connecting cable is faulty or damaged:
► Have the connecting cable replaced by a STIHL dealer.
5 Preparing Charger for Use
5.1
Preparing the Charger for Use
The following steps must be performed before commencing
work:
► Make sure the charger is in a safe condition, @ 4.5.
► Clean the charger, @ 10.
► Fitting the adapter, @ 6.1.
► If you cannot carry out this work: Do not use the charger.
0458-900-9921-A
All manuals and user guides at all-guides.com
6.1
► Attach the adapter (2,3 or 4) at the charger (5).
► Connect the battery (1) to the adapter (2, 3 or 4).
6.2
► Disconnect the battery from the adapter.
7.1
The charging time depends on various factors, e.g. the
battery temperature or the ambient temperature. For
optimum performance, observe the recommended
temperature ranges, @ 13.3
When the power plug is plugged into a power outlet and the
battery is connected to the charger, charging starts
automatically. The charger switches off automatically when
the battery is fully charged.
The battery and the charger warm up during charging.
6 Connecting and Disconnecting Battery
Connecting the battery
2
3
1
Disconnecting the battery
7 Charging the Battery, LEDs
Charging the battery
English
5
4
21
Publicité
