Publicité
3.
The utility will display any available wireless networks in your area. Click on a network
(displayed using the SSID) and click the Connect button.
4.
If the network is security-enabled, you will be prompted to enter the key as shown below. If
not, you will connect to the network directly without entering a key.
3.3.2 In Windows 7
Windows 7 users may use the built-in wireless utility. Follow the steps below.
1.
Left-click the wireless icon
display any available wireless networks in your area. Highlight the wireless network
(displayed using the SSID) to be connected and then click Connect.
DW-600
AC600 Wireless Dual Band USB Adapter User Guide
Figure 3-18
Figure 3-19
in your system tray (lower-right corner). The utility will
18
Publicité
