Publicité
NOTE
(without i-Size base)
This is a Universal Belted Enhanced Child Restraint System. It is ap-
proved according to Regulation No. 129, for use primarily in "Univer-
sal seating positions" as indicated by the vehicle manufacturer in the
owner's manual.
If in doubt, consult either the manufacturer or the dealer.
NOTE
(with i-Size base)
This is an «i-Size» child restraint system. It is approved in accordance
with Regulation No. 129 for use in seating positions compatible with
«i-Size» restraint systems, as specified by the vehicle manufacturer in
the owner's manual.
If in doubt, consult either the manufacturer or the dealer.
WARNING:
READ THESE INSTRUCTIONS CAREFULLY BEFORE USE AND KEEP
THIS GUIDE IN CASE YOU NEED TO REFER TO IT IN THE FUTURE.
Failure to follow these instructions may affect your child's safety. Only
install your infant seat on a forward facing seat.
DO NOT USE THIS CHILD SEAT ON A PASSENGER SEAT FITTED
WITH AN AIRBAG. IF YOU NEED TO INSTALL THE SEAT IN THE
FRONT PASSENGER SEAT, PLEASE ENSURE THAT ANY AIRBAG IS
DEACTIVATED!
• Rigid elements and plastic parts of the child restraint device must
be positioned and installed so that they do not, under normal vehicle
usage conditions, become jammed under a moveable seat or in the
vehicle door.
• Keep all straps used to attach the restraint device to the vehicle taut,
and adjust the straps used to restrain the child. It is also important that
EN
33
Publicité
