Publicité
2. Remove three screws with suitable tools.
fridge compartment door.
3. Remove middle hinge, screws, screw caps and plastic inserting nails. Install them on the other
side.
4. The disassembly and installation of bottom parts :
A. Disassemble lower hinge and screws. Then install them on the other side and consolidate the
lower hinge.
Note: the refrigerator-freezer incline angle less 45°.
B. Swap over the position of the adjustable foot to the other side of the cabinet.
10
efully the
Remove three screws
.
C. Swap over the position of the lower door block to the other side. Install the screws and
consolidate them.
5. Install the lower door and take care of its alignment with the appliance body.
6. Tighten the screws of the middle hinge on the reversible side.
7. Install the top door and remove the existing top door block. Install a new top door block
. Screw it down.
8. Move the hinge to another side of the box after removing the screws on the hinge;
.
9. Install the hinge cover after fastening the hinge.
11
Publicité
