Publicité
This fine pump that you have just purchased is designed from the latest in
material and workmanship.
Before installation and operation, we recommend the following procedures :
Check with your local electrical and plumbing codes to
A
ensure you comply with the regulations. These codes have
been designed with your safety in mind. Be sure you comply
with them.
A separate circuit have to be lead from the home electrical
B
distribution panel properly protected with a fuse or a circuit
breaker. We also recommend that a ground fault circuit be
used. Consult a licensed electrician for all wiring.
The ground terminal on the three prong plugs should
C
never be removed. They are supplied and designed
for your protection.
Never make adjustments to any electrical appliance or
D
product with the power connected. Do not only unscrew
the fuse or trip the breaker, remove the power plug
from the receptacle.
APPLICATION
This submersible utility pump is designed for
a portable application, for dewatering around
homes.
This pump is great for water transfer from
basin, pool cover, flooded floor, flat roof.
May also be used for waterfall, fountain.
CAPACITY
5'
2270 US GPH
1 0'
2100 US GPH
1 5'
1700 US GPH
20'
975 US GPH
2
FOR INFORMATION | TEL : 514.337.4415 | FAX : 514.337.4029
SAFETY INSTRUCTIONS
Friction loss
in pipe not
included.
FEATURES
Non-corrosive material.
Stainless steel mechanical rotary seal.
Thermal and overload protection.
1/3 HP, 115V AC, 60Hz, 3.4A, (6.1A when start).
NOTICE
This unit is not designed for applications to
pump salt water or brine.
Use with salt water or brine will void warranty.
Publicité
