Publicité
3 Setting up the VoIP communication
IP address of your PEAKnx touch panel. This is displayed in the lower part of the YOUVI
Dashboard App.
3.
From the menu on the left, select "Cameras".
4.
Use the "+" symbol to add a new camera set.
5.
Click the "+"-Symbol next to "Select Camera Stream" to create a new camera stream.
6.
For the "Stream Name", enter an appropriate name of your preference.
7.
Set the Stream Type to "MJPEG".
8.
Enter the link of the camera stream from your door station under "Low Resolution URL" as
well as under "High Resolution URL". You can find it on the AGFEO configuration website
under Video.
9.
Click "Save" to register the settings with your PEAKnx touch panel.
10.
Within the PEAKnx Touch Panel, switch back to YOUVI Visu
11.
In order to ensure that the visualization is automatically activated when the system is reboo-
ted, open the YOUVI Visu settings under Auto start and activate this feature.
12.
Now switch on the "Edit Mode" and switch to the Dashboard.
13.
Select the "Webcam" button to select a Camera created in YOUVI Configuration.
VoiP-Software
To use „Voice over IP" on the touch panel, you need a running instance of a VoIP software, like
Micro SIP, Zoiper or similar. This VoiP software appears when a call from the door station is
made and pops up, even with the visualization running. So you can see the camera image and
answer the call at the same time.
23
Publicité
