Publicité
3 Setting up the VoIP communication
2.
Go to „Install Door intercom".
3.
Under More > License, you can view the remaining days of your trial license.
4.
For unlimited use, please purchase the module in the PEAKnx Shop.
5.
Select the Door intercom icon on the Dashboard page to open the settings.
6.
Add a new door station via the „+" symbol.
7.
Intercom name: This name appears as a label in the upper left corner of the widget.
8.
Username: Enter the name that you have assigned in your Fritzbox (your SIP server) for
the touch panel with YOUVI, e.g. "Controlmini" or in the case of TekSIP, the corresponding
number combination.
−
You can also find your credentials under fritz.box > Telephony Devices if you edit the crea-
ted PEAKnx Panel (IP Phone) and go to the tab "Login data."
9.
Password: Enter the password associated with the user name here.
10.
SIP Server IP Address: Enter the IP address of your SIP server/fritzbox here.
11.
Camera Stream: Enter the link of the camera stream from your door station. You can find it
on the AGFEO configuration website under Video.
12.
Stream Type: Set the Stream Type to "MJPEG".
13.
Unlock method: Select the mechanism by which your door opener function is connected,
e.g. DTMF.
−
DTMF Code: Enter the DTMF opening code, that you defined in the "Relay" tab on the
Agfeo configuration website.
−
Http Request: Enter the http command to open the door.
−
Telegram: Specify the group address for opening the door.
−
Lock After (for telegram): If a group address is specified, a 1 will be sent to the group
address when the door opener icon is touched and a 0 is sent after the opening interval
has passed.
14.
Save your entries.
15.
After the YOUVI software and the door station have registered as clients in TekSIP Manager,
they turn green and are displayed in the „Registrations" tab.
20
Publicité
