Kohler K-10579 Guide D'installation page 9

Supply
Hose
7. Supply Connections
Connect the supply tubes to the supply stops. (Left is hot - right
is cold.)
Wrench-tighten all connections.
8. Installation Checkout
Connect the P-trap.
Ensure that all connections are tight.
Remove the aerator.
Open the drain.
Turn on the main water supply.
Check for leaks in the supply piping. Repair any leaks.
Open the hot and cold valves and run water through the spout
for about a minute to remove any debris.
Check for leaks in the drain piping. Repair any leaks.
Turn the valves off.
Remove any debris from the aerator and reinstall.
Kohler Co.
All manuals and user guides at all-guides.com
Supply
Stop
9
Spout
Aerator
1039582-2-B