Publicité
All manuals and user guides at all-guides.com
Step 16
16.1. From the left side of the gazebo, insert a Screw (W) on the end of each Roof Bar (J, J1, J2), as
shown in Illustration 1. Place the Roof Holder Bar (I), making sure that the previously installed screws
are inserted in the holes on the bar. Place an End Cap (Q) on the first Screw (W) on the left side of the
gazebo and tighten it in place with a Nut (Y1). Place an End Cap (Q2) on the next Screw (W) and fix it
in place with a Nut (Y1). Do not place anything on the third screw for now.
16.2. Insert a Screw (W) on the three last Roof Bars (J, J1, J2). From the right side of the gazebo,
place the Roof Holder Bar (I) as in the previous step. Place an End Cap (Q1) on the first Screw (W) on
the right side of the gazebo and fix it in place with a Nut (Y1). Place an End Cap (Q2) on the next
Screw (W) and fix it in place with a Nut (Y1). Do not place anything on the third screw for now.
16.3. Place the Roof Holder Bar (I) on both screws that do not have end caps. Add End Caps (Q2) on
each Screw and tighten them with Nuts (Y1).
CAUTION:
For this step, more than two people are required.
Page
22
Publicité
