Publicité
All manuals and user guides at all-guides.com
Step 10
10.1. Install the Roof Central Bars (J2) aligning the small Screws in the center of the Bars (J2) with the
holes of the Connectors (P) found on the Lintel (G); fix them with Nuts (Y1).
10.2. Attach the end of the Roof Central Bars (J2) to the Bars (D&F) with Screws (V) in the holes of the
Connectors (P).
NOTE:
Long Screws (W1) previously inserted in the Roof Holder Bars (J2) will be used in Step 11 to
install the Reinforcement Bars.
Page
16
Publicité
