Publicité
All manuals and user guides at all-guides.com
Step 6
6.1. Attach a Connector (P1) to each end of the Lintel (F) and (G) and to the end of the Rail (D) with
Screws (V).
6.2. Place the Roof Holder Bars (J & J1) onto the Connectors (P1) which are installed at the ends of
the Lintel (G). Place Screws in the center of the Roof Holder Bars (J & J1) into the holes of the
Connectors, and tighten in place with Nuts (Y1).
6.3. Attach the Roof Holder Bars (J & J1) by passing Screws (V) through the holes on top of
Connectors (P1).
NOTE:
The Long Screws (W1) previously inserted on the Roof Holder Bars (J & J1) will be used in
Step 10.
Page
12
Publicité
