Publicité
4. To hang files from side to side, attach one file
clip (L) to each side of drawer and insert one
long metal bar (M). (See Figure 3)
Figure 3
M
L
5. To hang files from front to back, attach two file
clips (L) to back of drawer and insert two short
metal bars (N). (See Figure 4)
Figure 4
N
L
PAGE 2 OF 6
ASSEMBLY CONTINUED
6. Attach one bracket of wall anchor (R) to back of top
of cabinet using two M4 x 20 mm screws. Mark holes
on wall where plastic anchors are to be located.
Drill holes using 5/16" drill bit. Mount opposite
bracket of wall anchor to wall with two M4 x 40 mm
screws and two plastic anchors. Tighten cable tie to
prevent tipping. Repeat for opposite side of cabinet.
(See Figure 5)
Figure 5
1-800-295-5510
uline.com
Top
Back
Wall
R
1224 IH-10252
Publicité
