Publicité
DANGER OF FIRE when used improperly!
– Do not use on artificial hair, only on human hair!
– Fire risk due to high temperatures!
– Note: Only use on dry hair
In order to ensure faultless operation, care
must be taken that:
– You use the device only according to the data given on the
specification plate.
– Permitted ambient temperature: +10°C to +40°C.
– Clean the device thoroughly after every use (see chapter
"Cleaning, Care, Storage").
– This device can be used by children aged 8 years and above
as well as by persons with reduced physical, sensory or
mental abilities or lack of experience and knowledge, if they
are supervised or instructed on the safe use of the device
and have understood the resulting dangers.
– Only use accessories recommended by the manufacturer.
– Keep the parts and surfaces clean and free of dust, dirt and
chemicals (such as hairspray)
CHARGING INSTRUCTIONS
CHARGE THE DEVICE FOR 3 HOURS BEFORE FIRST USE.
Charging without using the charger
1. Connect the device connector plug (4) to the socket on the
device.
2. Check whether the device is switched off. Now plug the
power adapter (5) into the socket.
3. During the charging process, the charging symbol (9) lights
up.
4. After the charging is complete, the charging process is
automatically stopped. The battery status "low" (8) and
"high" (7) lights up.
5. Unplug the power adapter (5). The HairMaster®TRIMMER is
now ready for use.
Charging using the charger
1. Connect the device connector plug (4) to the charger (16).
2. Plug the power adapter (5) into the socket.
3. Check whether the device is switched off. Place the
HairMaster®TRIMMER in the charger (16).
4. During the charging process, the charging symbol (9) lights up.
5. After the charging is complete, the charging process is
automatically stopped. The battery status "low" (8) and
"high" (7) lights up.
6. Unplug the power adapter (5). The HairMaster®TRIMMER is
now ready for use.
DANGER OF ELECTRIC SHOCK! Never touch
the device with wet hands when connected
to the power supply.
IMPORTANT!
1. The device should never be left unattended when it is
plugged in.
2. The charging time is approx. 1 hour. The device operating
time can be maximized after the battery has been charged
and discharged through use 3 or 4 times.
3. After charging and using 400 times, the battery power can
decrease to 80%.
4. The hair clipper will become warm during use and while
charging.
5. Do not use any extension cables with this device.
START-UP
Charge the device for 3 hours before first use.
Before initial use, let the device run for about 3 – 5 minutes.
Due to the manufacturing process, a slight odor may be
noticed. This is harmless and only occurs when used for the
first time.
GB
14
Publicité
