Buffalo CF764 Mode D'emploi page 7

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
Telephone Helpline: 0845 146 2887
Double Quantity
To increase cooking time when cooking more than one serving.
1.
2.
3.
4.
Note - The cooling fan may automatically run for a while after cooking to cool the oven.
Programming Pads
To change the amount of time or the power level for a preprogrammed pad
1.
2.
3.
4.
5.
6.
7.
20 sec.+ Pad
This function allows you to reheat for 20 seconds at full power by simply touching the 20 sec.+ pad. By repeatedly touching the 20 sec.+ pad you can extend
reheating time to 5 minutes in 20 second increments
1.
2.
Note - The cooling fan may automatically run for a while after cooking to cool the oven.
Open the door and put food in the oven. Close the door. 'HELLO' will show on the display
Press X2 pad.
• Amount of time added is a percentage of the original preprogrammed cooking time (Factory setting +80% of time)
• The percentage of time added can be changed. See Programming Cook Factor
Press desired preprogrammed pad
Oven begins to cook
• The oven lamp will turn on and cooking will start
• The first STAGE indicator will start to blink and heating time will count down
Open the door
• Display turns off
Press and hold number 1 pad.
• Oven will enter programming mode and will show PROGRAM in the display
Press number pad to be programmed
• Program number will show in the display
• For single digit entry, press only one number pad
• For multiple digit entry, press from one to three pads one by one
Press POWER LEVEL pad to select a desired power level
• If 'HI' shows in display, the power level is set to full power
• The % indicator will light if a lower power level is set
• You can change the power level to the desired setting by pressing POWER LEVEL pad repeatedly
Enter desired cooking time using the number pads
If multi stage cooking is required, repeat step 4 and 5.
• Display changes to cook time and power level for the next stage
• Up to three different stages can be programmed
Press START pad to save the program changes.
•To discard changes, press STOP pad.
Open the door and put food in the oven. Close the door. 'HELLO' will show on the display
Press 20sec.+ pad.
• When you press 20 sec.+ pad, ":20" shows in the display
• The oven will start immediately. It will add 20 seconds to the time counting down each time the pad is pressed
UK
6

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cf765

Table des Matières