Safety
instructions
• For safe and proper functioning of
the item as well as for avoidance of
damage of Furniture and getting injury
and maiming, we strongly recommend
to follow all points of the instructions
during installation.
• Follow installation instructions step-by-
step for exclusion on inaccuracy and
errors as well as possible breakages
Specialists.
• Follow General Rules of electrical
safety when connecting lamps to the
network.
•
on weight characteristics of Furniture
and its structural features.
• 2 persons are enough to install Furni-
ture in order not to damage it.
• Make sure that there are no cur rent-
carrying and water supply parts at the
spot of drilling of wall.
Installation
instructions
Carry out installation with the help of
will need: pen, tape ruler, level board,
screw driver+, crescent wrench, drill, con-
crete bits 6,8,10 mm, tile bits 6,8,10 mm,
silicone sealant.
2
Furniture maintenance
instructions
Furniture for bath-rooms is designed for
long-term service. We kindly ask you to
follow the following instructions:
• lf furniture is very close to bath or show-
er zone, it is obligatory to install shower
barrier.
•
tion system).
•
water.
• Prevent water drops to dry on the sur-
face of the furniture.
• Do not use abrasive, acid- and alkali-
con taining materials for cleaning of fur-
niture and sink in order not to damage
surfaces.
• Carry out cleaning with clean, soft and
dampish napkin (by no means napkin of
• Obstinate stains (fat, cosmetics, etc.)
should be removed slowly. Such stains
are completely removed with the help
of 1 %soap solution or reduced impact
detergent. Then wipe dry all surfaces.
• In case of strong contamination of
miner al founding, ceramics or glass,
please, use soft liquid detergent (with-
out alcohol and abrasive agents), e.g.,
vinegar and warm water.
• Avoid strokes and scratches with heavy
and sharp objects.
English