Publicité
MAINTENANCE/WASHING
INSTRUCTIONS
Clean the fabric with lukewarm
water and soap. Rinse with fresh
water and leave to dry. Never use
bleach or other chemical detergents.
Periodically (approximately once a
month) treat the wheels and metal
parts with Teflon or silicon spray to
ensure the pushchair continues to run
smoothly.
The aluminium parts of your Aer+
buggy are coated to protect it
from external influences such as
corrosion. Coated aluminium parts
are vulnerable to acidic cleaners or
grease, which can cause stains and
discoloration of the aluminium parts.
We therefore advise you to clean the
aluminum parts of your pushchair
with warm water and a soft cloth.
WARRANTY
Our goods come with guarantees
that cannot be excluded under
the Australian Consumer Law.
You are entitled to a replacement
or refund for a major failure and
for compensation for any other
reasonably foreseeable loss or
damage.
Joolz Aer+ - Manual - Buggy - AUS-USA-CA.indd 21
Joolz Aer+ - Manual - Buggy - AUS-USA-CA.indd 21
You are also entitled to
have the goods repaired or replaced
if the goods fail to be of acceptable
quality and the failure does not
amount to a major failure. See page
95 for further information.
Safety was an important
consideration throughout the
development of the Joolz Aer+.
Our products therefore meet the
following safety standards:
Europe: EN 1888-2:2018
United States: ASTM F833-21
Australia: AS 2088:2022
Canada: SOR/2023-101
Please visit joolz.com, facebook.com/
myjoolz or contact your retailer for
any questions and/or comments.
Instruction manual
Joolz Aer +
21
15-08-2024 12:20
15-08-2024 12:20
Publicité
