Publicité
5.4 Manual Time Programming
To activate the radiator, press and hold the „-" button for 3 seconds until „00H" appears on the screen. Modify the
countdown number by pressing the „+" or „-" buttons.
5.5 Light Control
Turning On/Off Lights: Press the „Light" button to turn the lights on or off.
EN
Dimmable: Press and hold the „Light" button; the brightness of the lights can be adjusted from minimum to maxi-
mum until an audible signal is heard.
Color Temperature: Use the touch button to switch between different color temperatures. Press and hold both the
„Light" and „-" buttons until „C1" appears on the screen. Select between „C1", „C2", and „C3", corresponding to color
temperatures of 6000K/4000K or 3000K. After connecting the device to the app, additional color temperature op-
tions are available.
5.6 Anti-Fog Mode
This radiator has an anti-fog mode function. Press and hold the power on/off button until „AF" appears on the
screen to enter anti-fog mode. It will operate cyclically for 20 minutes to prevent fogging on the mirror surface.
Upon completion, the radiator will enter standby mode. If you want to stop it early, press and hold the power on/off
button until „---" appears on the screen.
5.7 Child Safety
Press the „+" and „-" buttons simultaneously for 3 seconds to activate child safety mode; „KS" will appear on the
screen. Press both buttons again to deactivate child safety mode.
5.8 Window Opening Detection
This radiator has a window opening detection function, which is disabled by default but can be activated after
connecting the radiator to the app. When the function is active, the radiator monitors the heating system. If a sudden
temperature drop occurs within a short time, „OPE" will flash on the screen. The system will turn off the radiator,
and after 30 minutes, it will resume normal operation. Pressing any button during this period will return the radi-
ator to normal operation.
5.9 Temperature Calibration
Activate the radiator; now the screen displays the temperature. Press and hold the „+" button for 5 seconds to enter
temperature calibration mode. Modify the number by pressing the „+" or „-" buttons (adjustable between +5 / -5
degrees).
Additional App Functions
After connecting to the app, additional settings can be made, including:
- Setting a heating mode and a time program
- Remote control of the radiator
- Deactivation of the audible signal „beep"
Activation/Deactivation of WLAN Function
Activate the radiator, press the power on/off button until „---" appears on the screen, then hold the „-" button for 10
seconds to deactivate the WLAN function of this radiator; The WLAN symbol on the screen will disappear. Hold the
„-" button again for 10 seconds to reactivate it.
43
Publicité
