Publicité
4 Controlpanel and Display
EN
* When the screen display shows "— — —",, it means that the heater is under standby mode.
5 Operation
5.1 General Introduction to the Smart Control
The LM-Pro has an integrated WiFi touchscreen control box, which means there is no additional thermostat needed
to control the heater. The panel can either be controlled manually using the touch screen on the bottom of the
mirror surface or operated via a smartphone. Once the heater has been connected to the APP, the smartphone will
take control along with the control box. If your home internet is not working, it is still possible to operate the heater
via touchscreen. Just power off the heater and power it on again after a few seconds. Once the heater is reconnected
to the WiFi, it will automatically reconnect to the smartphone. Both heating and lighting systems can be easily
operated via the touch button and the APP.
Activate/Deactivate the WIFI Function
Power on the heater, press the power button until the screen shows "— — —", press and hold the "-" button for
10 seconds to deactivate this heater's WIFI function; The WIFI sign on screen will disappear. Press and hold the "-"
button for 10 seconds again to reactivate it.
Manual Temperature Control
By pressing the ON/OFF button, the current ambient temperature will be displayed on the temperature display.
Adjust the desired temperature by pressing the „+" or „-" buttons.
42
1� Screen
2� + button
3� - button
4� Power button
5� Light button
6� Wifi indicator
Publicité
