Publicité
3 Installation
Note: The kit supplied in the package is designed for mounting vertically on a solid wall. If mounted onto other types
of walls, you will need appropriate fixings (not supplied). Please make sure the wall is safe to mount. We highly
recommend to have the panel installed by a qualified electrician or installer authorized by Sundirect. The heater
must be at least 20 cm removed from all objects, walls, etc.; the distance to the floor must be at least 20 cm.
41
Step 1. Use the supplied
mounting bracket to mark the
position of the holes on the
wall.For vertical wall moun-
ting "A" signal will be the top
of the mounting bracket. For
horizontal wall mounting "B"
signal will be the top of the
mounting bracket.
Step 2. Drill holes using a
8mm drill.
Step 3. Insert the dowels into
the holes.
Step 4. Screw the screws into
the dowels through the holes
on the mounting bracket.
Step 5. Mount the panel on the
mounting bracket.
Step 6. Move the panel into
two directions, tight the 4
spacers on the back side of the
mirror to make sure the panel
is secured.
EN
Publicité
