Publicité
heating time reference table
NOTE:
1.
External power supply (5V 2A adapter) is recommended to use when using
the warmer at home or charging.
2.
Please charge with at least 10000mAh power bank when using the warmer
outdoors.
3.
Time in below table is laboratory data. Actual time is different based on
different use environment.
4.
Battery life depends on the amount of liquid you heat and the temperature
you choose to set.
warming time reference table
NOTE: The time indicated in the table below is tested with a fully charged battery.
The actual heat holding time depends on various environmental or other factors.
Plastic bottle room temperature 20ºC.
Quantity of
milk (ml)
120 ml
240 ml
Quantity of
milk (ml)
120 ml
240 ml
cleaning
Follow these steps for cleaning:
1.
After use, hold down the power button for 2 seconds to turn off, disconnect
the USB charging cable and cover the USB port.
2.
Clean milk or water residue from the steel heating part with a damp cloth.
3.
Do not submerge the product in water to clean it.
4.
Do not steam sterilize gaskets.
5.
During the cleaning process, make sure to clean and dry the silicone seal ring.
Bottle type
Plastic baby bottle
Plastic baby bottle
HEATING TIMES
Type of bottle
Plastic baby bottle
Plastic baby bottle
Plastic baby bottle
Plastic baby bottle
Temperature
maintenance
40ºC
40ºC
Initial milk
Heating time to reach the
temperature
milk temperature at 37°C
5ºC
20ºC
5ºC
20ºC
20
Time
6-7 hours
5-6 hours
9:20
4:15
18:45
8:25
Publicité
