Publicité
operation
1.
Select the correct bottle adapter for baby bottle.
2.
Pour the water or milk into the baby bottle.
3.
Make sure that the silicone sealing ring has been positioned correctly (it has its
own direction of positioning) in the groove of the heating plate.
4.
Install bottle adapter, place the warmer upside down and install onto the baby
bottle.
5.
Place the warmer with installed baby bottle upside down, check if any leakage
or install again.
6.
Press the power button and hold for 3seconds to turn on the product. It will
show the temperature that set last time. Press the control button to set the
temperature that you need (37ºC, 40ºC, 45ºC, 50ºC).
7.
The display will flash for 5 seconds and show the current temperature and start
warming.
8.
To warm the milk/water evenly, during the heating period, it is recommended
to invert and gently stir the milk contained in the bottle, without removing it
from the bottle warmer, to ensure even heating of the contents.
9.
When the water/milk reaches to the set temperature, you can hear a 'beep'
sound. Then the warmer will keep warm automatically at the set temperature.
10.
Shutdown: Press and hold the power button for 2 seconds to shut down.
19
Publicité
