Mitsubishi Electric Smart ME PAR-U02MEDA Mode D'emploi page 18

Product features
▌ Energy-save control with the use of the built-in occupancy sensor
• Energy-save control will be performed when the occupancy sensor detects vacancy.
• When the occupancy sensor detects no human movement for a certain period of time, this will be regarded as the
vacancy.
• One of the following energy-save controls can be used at a time.
Energy-save control
Non-use
ON/OFF
Set temperature offset
Fan speed down
Thermo-off
• Energy-save control can be stopped according to the brightness level detected by the brightness sensor.
(Example: While the occupants are sleeping at night)
18
Occupancy sensor
Brightness sensor
Control when vacancy is detected
–
The unit will be turned off.
The set temperature will be offset.
The fan speed will be set to "Low."
The unit will go into the Thermo-off state.