Publicité
User manual
1.3 Unpacking advices
Immediately after receiving a device, carefully unpack the carton, check the contents to make sure all
parts are present and have been received in good condition, If something misses or if it appears to be
damaged, notify the shipper immediately and keep the packing material for verification. Do the same if
the packaging appears to be damaged or not handled properly.
Save the carton and all packaging materials. In the event that a device must be returned under warranty,
it is important that it be returned in the original box and the original packaging
Carefully read this manual
1.4 Safety :
• Please keep this user manual for future
• the device to another user, be sure to send it to him.
* Always make sure that you connect to the correct voltage and that the line voltage to which you are connecting is not higher
than that indicated on the sticker or back panel of the unit.
* This product is for indoor use, please always keep the machine dry. Keep the machine away from moisture and surrounding
water. Operating in the rain will need you to ask for specially designed waterproof protection in advance.
* To prevent fire or shock hazard, do not expose the controller to rain or moisture. Make sure there are no flammable
materials near the unit during operation.
* Do not use the device if the case is damaged
* Stop using the machine if there is water, moisture or leakage.
* Do not use in the presence of people with epilepsy
* Always unplug the power source before servicing or replacing the fuse and make sure to replace the fuse.
* In the event of a serious operating problem, stop using the device immediately. Never try to repair the unit yourself. Repa irs
made by unqualified persons may cause damage or malfunction. Please contact the nearest authorized technical support
center. Always use the same spare parts.
* Make sure that the power cord is never damaged.
* Turn off the machine when not in use.
* Never unplug the power cord by pulling the cord.
* Be sure to use a grounded plug.
* Never use with dimmer pack or any rheostat or variable resistors as power supplyer
* Do not use this device in ambient temperature conditions above 40 ° C or 104 ° F.
* Use by adults only, the machine must be installed out of reach of children. Never leave running unattended.
* Keep away from fire, explosive and flammable products. Never mix the liquid with a flammable product (oil, gasoline,
perfume, ...)
* Use in a ventilated volume, leave a space of at least 50 centimeters around the machine. Do not cover ventilation holes.
* Do not use the machine at very high temperatures.
* Let the machine cooling after use, don't touch the housing while and after operating, hot ! The product is very hot during
operation and it remains hot for a long time after operation has stopped. Do not touch the product's nozzle
* Keep a minimum distance of 6.6 ft. (2 m) from the machine to the nearest human or flammable material. The output spark
from the nozzle must be in the air but not reaching any object. And mind the falling residue after the spark.
* Eye protection is always required when operate the machine closely.
* In the event of an unexpected event during use, stop the machine immediately, turn off the power, check the powder level,
fuse, power cable and plug. If the problem can not be solved, contact your dealer.
* Do not eat powder, or call a doctor or the nearest poison control center immediately. If powder comes in contact with the
eyes, rinse thoroughly under running water.
* Empty the powder storage before transporting.
* Do not install the machine if you are not sure if you have the required consumables.
* Do not install the machine into any capacity, operate only on the ground.
* Electrical wiring must respect the star or web wiring model, any fixture of the installation must have average same cable
length to the supplying power panel.
* Do not roll long length of powering cable, this may burn the fixture's internal power supply.
* Use only DJPOWER Spark seed PRO-K – NEVER refill through the OUTPUT Nozzle !!
V-1 Spark Machine
10
Publicité
