Publicité
■ Operating Instructions
●
Charge
1. When hearing a low battery prompt tone, please charge the speaker.
2. If the speaker is not used for a long time, it's better to charge it once every three
months to extend the battery life.
Note:
The maximum charging voltage and current are limited to 5V and 1A. To avoid potential
electrical damages to the product, do not connect to any other power outlet that exceeds
the limits.
●
USB audio streaming connection
1. Insert the USB cable from the speaker into the USB-C port on a computer.
2. It will switch to USB audio streaming mode when the speaker is powered on.
3. After the computer auto-installs the USB audio streaming driver, the speaker is ready
to use.
Note:
Manual switching of devices is required when using Apple computers. Please open the
sound settings of Apple computers and select "EDIFIER MF200" as the output device.
●
AUX connection
1. When the speaker is powered on, connect the 3.5mm-3.5mm audio cable to the
speaker, it will automatically switch to AUX input.
2. Or press the power on/off button to switch to AUX input.
3. Select the audio file on your device to play, the speaker is ready to use.
Charging: red LED steady lit
Fully charged: red LED off
English
Publicité
