Publicité
3
A
B
Soft PVC High Pressure Hose
Assembly
Screw Soft PVC high pressure
hose (B) clockwise onto bottom
left, when facing the unit, front of
power washer unit (A). Pull back
collar and insert o-ring post into
water outlet far enough so collar
can thread onto outlet threads until
hand tight. If it takes fewer than
six turns you have not properly
tightened the Soft PVC high
pressure hose fitting. It is easier
to position the power washer in
front of you to ensure that the
threads are started correctly.
Failure to properly tighten Soft
PVC high pressure hose will result
in the hose slipping or popping off
immediately upon turning unit on.
Do not worry about damage if this
occurs–just reinstall and take extra
care when screwing on the high
Soft PVC pressure hose fitting.
Note: DO NOT use pliers or locking
pliers to tighten.
8
All manuals and user guides at all-guides.com
4
J
B
Connect the other end of Soft PVC
high pressure hose (B) to spray gun
(J) by inserting the brass metal tip
of high pressure hose into the fitting
just ahead of trigger guard. It will
lock into spray gun with a "click".
Confirm hose is locked into spray gun
by slightly pulling on them. The hose
is now securely attached to spray
gun.
Note: DO NOT press button on un-
derside of gun when connecting hose
to gun.
5
J
B
2
To release hose (B) from spray gun
(J), press button on underside of gun
toward trigger guard. The hose will
slide out from connection.
6
Lock
J
I
Unlock
J
Locking Spray Gun (before Lance
installation)
To lock the trigger of the spray gun
(J), aim the gun away from you and
push the lock button from right
to left. After doing so, squeeze or
pull the trigger to make sure it is
locked and will not move. Always
leave lock button in locked position
when not in use. This ensures the
gun is in "safe" mode until it is
ready for use.
7
G
H
J
H
High/Low Nozzle Lance and Turbo
Nozzle Lance Installation
While the spray gun (J) is in the
locked position, insert the high/low
nozzle lance (G) or turbo nozzle
lance (H) into the end of the spray
gun, by inserting and pushing together
turning clockwise simultaneously.
To remove, push together and turn
counterclockwise.
Note: Always push the safety lock
button to lock the trigger when
changing lances to ensure that they do
not accidentally eject with force during
removal.
Note: When using the turbo lance,
make sure the turbo nozzle is screwed
on tight at the end of the lance each
time you use it.
Note: Turbo nozzle is not adjustable.
8
A
F
Garden Hose Adapter Installation
Attach collar of garden hose adapter
(F) directly to power washer water
inlet (A). Hand tighten.
9
F
9
Publicité
