Publicité
Installation
INSTALLING THE WIRING
DANGER:
Risk of electrical shock . This range hood must be
properly grounded .
DANGER:
Turn off the power circuit breaker or the power
switch on the junction box before installing or servicing
this unit . Touching circuitry inside the range hood while it is
energized will result in death or serious injury .
DANGER:
All electrical wiring must be properly installed,
insulated, and grounded . Improper insulation and grounding
will result in deadly electrical shock .
- It is the customer's responsibility to contact a qualified electrical
installer and assure that the electrical installation is adequate and
complies with the National Electrical Code, or CSA standards, as
well as all local codes and ordinances .
- This range hood is equipped with a cable with a grounding wire and
a grounding plug . The plug must be plugged into an electrical outlet
that is properly installed and grounded .
INSTALLING THE DAMPER (IF NECESSARY)
WARNING:
Sharp edges . Wear safety gloves .
CAUTION:
Be very careful when installing the damper .
Applying too much force or bending the damper too much
may damage or break the damper hinge ends .
The damper is pre-installed at the factory. Make sure that it has not
come loose during shipping and that it opens freely. Re-install it if
necessary .
- Insert one end of the damper (3) into the hinge slot (4) at the top
of the range hood (A) .
- Gently bend the damper (3) and insert its other end into the hinge
slot (4) .
All manuals and user guides at all-guides.com
9
Please contact cs@conglomkb.com or 1-877-333-0098 for further assistance .
IMPORTANT:
Installation work and electrical wiring must be done by a qualified
person(s) in accordance with all applicable codes and standards,
including fire-rated construction.
3 in. MAX
(76 mm)
36 in. MAX
(914 mm)
Fig. 5
3
4
A
Fig. 6
D
C L
3
CONGLOMKB .COM
Publicité
