Publicité
Installation (continued)
INSTALLING THE THE HANGING SUPPORT STRUCTURE (CONTINUED)
- Secure the hanging bars to each other with 16 M5 screws (HH), M5 screw nut (FF) and flat washer (GG).
- If your range hood is going to be ducted (outdoor vented), connect the supplied flexible aluminum duct (F) to your home's duct using
aluminum duct tape . For recirculating (indoor vented) installations, skip this step .
- The electrical connection must correspond to the electrical requirement noted on the rating label, which is placed inside the range
hood . The range hood should now be connected to the electrical supply . Inspect the range hood to ensure it is operating correctly by
selecting each fan speed and switching the lights on and off .
D
E
All manuals and user guides at all-guides.com
Fig. 9
Please contact cs@conglomkb.com or 1-877-333-0098 for further assistance .
HH
FF
GG
11
Top angle bars are
situated on the outside
Bottom angle bars are
situated on the inside
CONGLOMKB .COM
Publicité
