Publicité
All manuals and user guides at all-guides.com
Installation (continued)
ATTACHING THE DUCT (FOR OUTDOOR VENTED
F
INSTALLATIONS)
WARNING: FUEL (GAS) BURNING RANGES MUST BE VENTED
A
OUTDOORS USING, AT MINIMUM, METAL DUCTWORK AND RANGE
HOODS OF SUFFICIENT CAPACITY .
For ducted (outdoor-vented) installations, connect the flexible
aluminum duct (F) to the damper of the range hood using
aluminum duct tape and ensure the damper is moving freely .
For non-ducted (indoor-vented) installations, air is recirculated
through charcoal filters and exhausted through the top of the
chimney . Skip this step for indoor vented installations .
Fig. 13
TESTING THE RANGE HOOD
C
Once the range hood is securely in place and electrical and duct
connections (for outdoor vented models) have been made, test the
range hood to ensure it is operating correctly .
Once you are satisfied with your installation, remove the S-Hook
(BB) and lower the chimney gently onto the range hood .
A
Fig. 14
13
CONGLOMKB .COM
Please contact cs@conglomkb.com or 1-877-333-0098 for further assistance .
Publicité
