Télécharger Imprimer la page

New Air NCR-20-H Manuel De Produit page 8

Publicité

OPERATION
OPERATION
ELECTRICAL
Please ensure that the required voltage of the compressor is maintained at all times. Low or high volt-
age can affect the refrigeration unit. All units should be plugged into a grounded and properly-sized
electrical outlet, with appropriate overcurrent protection.
Please refer to the electrical requirements on the nameplate of the unit.
Please make sure that your unit has its own dedicated outlet. Do not use an extension cord.
• Single-phase power supply, 60Hz, voltage 115V. If the voltage is unstable, please install a voltage
stabilizer with capacity above 1000W.
• Avoid turning on and off the power too frequently. If the power is turned off, wait 5 minutes before
turning it on again.
• When the freezer will be out of use for a long time, disconnect the power first, then clean it. Please
examine the circuit whether it is in excellent condition before reuse.
LOADING PRODUCT
There must be space between the foods stored in the cabinet, between the foods and the inner
surface of the cabinet, so as to keep good ventilation of cold air and freeze evenly. Do not put in any
bottled or canned beverage with freezing point above the temperature in the cabinet when it is below
zero.
• For foods that should be moisture-free (or lose water easily), wrap them up with hermetically
sealed food bags or fresh films before putting in the cabinet for the sake of avoiding smell-mixing and
reducing frosting.
• Storage of volatile and combustible gases, liquids such as strong alkalies, strong acids, gas, etc. is
forbidden.
8
New Air Refrigeration
NCR/NCF Series: Installation & Operation

Publicité

loading

Ce manuel est également adapté pour:

Ncf-20-h