Publicité
MAINTENANCE
CLEANING & MAINTENANCE
CLEANING THE INTERIOR OF UNIT
• When cleaning the cabinet interior, use warm water and mild soap.
• Do not use steel wool, caustic soap, abrasive cleaners or bleach that may damage the stainless
steel surface.
• Dry the unit after cleaning.
• Use light soapy water when cleaning the door seal, apply a little of talcum powder on it after
natural drying to extend its service life.
• Use a soft cloth with water or a little detergent to clean the outside surface. Note, keep the
power supply and lower part of connect wires away from water to avoid electricity leakage.
• Repairs should be done by an authorized service technician so as to avoid further damages to
the unit. Unauthorized repair of electrical parts such as the compressor and the temperature
controller is forbidden.
WARNING
Disconnect the power cord before cleaning any parts of the unit.
10
New Air Refrigeration
NCR/NCF Series: Maintenance
Publicité
