Télécharger Imprimer la page

Fortin THAR-CHR1 Guide D'installation page 6

Publicité

6
OUTPUT | SORTIE
1-way
Yellow/Black | Jaune/Noir
Purple/White | Mauve/Blanc
Orange/Black | Org/Noir
Green | Vert
2
Pink/Black | Rose/Noir
White/Black | Blanc/Noir
Lt. Blue/Black | BleuPâle/Noir
Yellow | Jaune
Purple | Mauve
Orange
Blue | Bleu
Pink | Rose
~
White | Blanc
Lt.Blue | Bleu Pâle
12V Battery
(+)
Starter
Ignition plug | Connecteur d'ignition
5 PIN CONN.
VEHICLE | VÉHICULES
2004 - 2006
and some | et quelques
2007
Except Dodge Durango
WARNING
Connections at this connector are
only required if a Starter(+) wire is
present on the connector.
ATTENTION:
Les branchements à ce connecteur
sont requis seulement si il y a un fil
starter(+) présent au connecteur.
3
Disconnect the immobilizer connector witch is located
at the key cylinder.
4
Connect the male connector of the T-Harness to the
immobilizer module.
5
Connect the immobilizer connector to the female
connector of the T-Harness.
6
Press the EVO-CHR programming switch while
inserting the T-harness into the EVO-CHR module.
The Red LED will illuminate to indicate you are in
programming mode, release the programming button.
Go page 8
All manuals and user guides at all-guides.com
EVO-CHR T2 (THAR-CHR2)
WITH DATA-LINK \ AVEC DATA-LINK
WITH DATA-LINK
INPUT | ENTRÉE
Only connect for 1-Way Data-Link
Branchez pour Data-Link 1-voie seulement
n.c.
n.c.
E-Brake Status Frein Main
MUX
n.c.
n.c.
n.c.
MUX
3
Ground
MALE
MÂLE
Starter (+)
Remote Starter or Alarm
Démarreur ou alarme
Door Status Porte
Hood Status Capot
(+) Start IN
Brake Status Frein
Tach
Trunk Status Valise
Programming
Button
4
3
Débranchez le connecteur d'immobilisateur situé au
barillet de la clé.
4
Branchez le connecteur mâle du Harnais en T dans le
module d'immobilisation.
5
Branchez le connecteur d'immobilisateur dans le
connecteur femelle du Harnais en T
6
Maintenez le bouton de programmation du EVO-
CHR enfoncé en insérant le Harnais en T dans le
module. Le DEL rouge s'allume pour indiquer le début
de la programmation, relâchez le bouton de
programmation. Continuez à la page 8
DATA PORT
1-way
1-way
1-way
Ignition 1
1-way
1-way
1-way
1
Bouton de
CONN. 2
Programmation
EVO-CHR
6
THAR-CHR2
5
FEMALE
FEMELLE
E O
CHR
ALL
VEHICLE
VÉHICULE

Publicité

loading

Ce manuel est également adapté pour:

Thar-chr2