Publicité
English
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
• Ensure not to use damaged cables.
• Always wipe off the product with soft cloth, not with water.
Installation
1.
Connect the USB Type-C™ cable to a suitable power supply unit.
2.
Plug the power supply into a power outlet.
3.
You can start using the charger immediately.
Note
A PD 3.0 power supply is required to use all three charging surfaces at the same
time.
Position the mobile device as centered as possible on the charger. Make sure
that there are no objects between the mobile device and the charger.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 06/2024
-3-
Publicité
