Publicité
Table of contents
Before you begin... . . . . . . . . . . . . . . . . . . . . . . 13
For your safety . . . . . . . . . . . . . . . . . . . . . . . . . 13
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Claims for defects . . . . . . . . . . . . . . . . . . . . . . . 36
Before you begin...
Intended use
The unit is designed to accommodate and guide the
appropriate drills.
It may not be used as a milling stand.
This product is not intended for commercial use. Gen-
erally acknowledged accident prevention regulations
and enclosed safety instructions must be observed.
Only perform work described in these instructions for
use. Any other use is improper. The manufacturer will
not assume responsibility for damage resulting from
such use.
What are the meanings of the symbols used?
Danger notices and information are clearly marked
throughout these instructions for use. The following
symbols are used:
DANGER! Direct danger to life and risk of
injury! Directly dangerous situation that
may lead to death or severe injuries.
WARNING! Probable danger to life and
risk of injury! Generally dangerous situa-
tion that may lead to death or severe inju-
ries.
CAUTION! Possible risk of injury! Dan-
gerous situation that may lead to injuries.
NOTICE! Risk of damage to the device!
Situation that may lead to property damage.
Note: Information to help you reach a better
understanding of the processes involved.
These symbols identify the required personal protec-
tion equipment:
For your safety
General safety instructions
• To operate this device safely, the user must have
read and understood these instructions for use
before using the device for the first time.
• Observe all safety instructions! Failure to do so
may cause harm to you and others.
• Retain all instructions for use, and safety instruc-
tions for future reference.
• If you sell or pass the device on, you must also
hand over these operating instructions.
• The device must only be used when it functions
Drill stand
properly. If the product or part of the product is
defective, it must be taken out of operation and
disposed of correctly.
• Keep children away from the device! Keep the
device out of the way of children and other unau-
thorised persons.
• Do not overload the device. Do not use the device
for purposes for which it is not intended.
• Make sure to always wear the required personal
protective equipment.
• Exercise caution and only work when in good con-
dition: If you are tired, ill, if you have ingested
alcohol, medication or illegal drugs, do not use the
device, as you are not in a condition to use it
safely.
• This product is not intended to be used by per-
sons (including children) or who are limited in their
physical, sensory or mental capacities or who lack
experience and/or knowledge of the product
unless they are supervised, or have been
instructed on how to use the product, by a person
responsible for their safety.
• Ensure that children are not able to play with the
device.
• Always comply with all applicable domestic and
international safety, health, and working regula-
tions.
Device-specific safety instructions
• The drilling stand must always be screwed firmly
and securely to the workbench.
• Always secure the work piece with a vice before
you start to drill.
• Never remove the protective mechanisms.
• Keep children away from your workplace and
keep your machines and tools in a secured place.
• Always pull out the plug:
– Before changing machines or tools;
– Before carrying out maintenance work;
– When not in use.
• Before using the device for the first time, please
make sure you read the operating instructions for
the drill!
• Symbols affixed to your tools may not be removed
or covered. Information on the device that is no
longer legible must be replaced immediately.
Before putting the unit into operation, read
and observe the instructions for use.
Personal protective clothing
Wear goggles when working with the de-
vice.
Do not wear protective gloves when work-
ing with the device.
Wear tight fitting clothes when working with
the device.
If you have long hair, cover or wear a hair
net.
GB
13
Publicité
