Publicité
▪ Restarting the unit. If you attempt to restart before this time delay, the refrigerator will
not start.
▪ If you choose to change the thermostat setting, adjust thermostat control by one
numerical increment at a time. Allow several hours for temperature to stabilize
between adjustments.
Do not leave the door open for too long so that the indoor temperature does not rise
too much.
"COLD ZONE" SYMBOLS (Depending on models)
The symbol indicates the location of the coldest part of your refrigerator. This
area is in between the vegetable compartment at the bottom and the symbol at
the top, or the shelf at the same height. In order to maintain the temperature in
this area, make sure not to change the position of this shelf.
INSTALLING THE TEMPERATURE INDICATOR
To help you adjust your refrigerator correctly, it is equipped with a temperature indicator that
you can use to control the average temperature in the coldest area.
WARNING: This indicator is only intended for use in your refrigerator. Do not use it in another
refrigerator (as the coldest area will not be the same) or for any other purpose.
CHECKING THE TEMPERATURE IN THE COLDEST AREA
Using the temperature indicator, you should regularly check that the temperature is correct in
the coldest part of your refrigerator. The temperature inside your refrigerator depends on a
number of factors, such as the outside room temperature, how full your refrigerator is, and how
often you open the door. Take these factors into consideration when adjusting your appliance.
When the indicator shows "OK", it means your thermostat is set properly and the temperature
inside your refrigerator is correct.
If the indicator is white, it means the temperature is too high, so you should increase the
thermostat and wait for 12 hours before checking the indicator again.
28
Publicité
