CLEANING AND MAINTENANCE
Do not use abrasive cleaning agents or solvents.
1. Unplug the appliance from the mains socket.
2. Take out the food and store in a cool location.
3. Clean the appliance with a soft cloth, warm water and detergent.
4. Wipe the door seal with clear water only and then wipe dry thoroughly.
5. After cleaning, reconnect and adjust the temperature as desired.
6. Put the food back into the appliance.
The LED lights in the fridge cannot be replaced by the user. If the LED lights stop working, please contact
the local authorised service agent.
TROUBLESHOOTING
If there is a problem with your appliance, please check the following points before contacting customer
service.
Problem
Appliance does
not operate.
Appliance is
noisy.
Appliance not
cool
Possible causes
No electricity at power outlet.
Cabinet not stable or level.
Temperature setting not correct.
Frequent door openings.
Large amount of food recently
added.
Possible solution
Check that the plug is correctly connected
and power switched on.
See "Installation" section.
See "Temperatures Control" section.
Minimise door openings to allow
temperatures to stabilise.