Publicité
en-us_main.book.book Page 31 Monday, January 29, 2024 11:15 AM
Turning Melt On
Place the cookware on the rear right cooking zone.
Activate the Power Levels popup and press the
MELT key.
BOOST
Use the Boost function to boil water or heat up
large quantities of food quickly.
To prevent damage to the product, if one of the
right-side elements is turned on when the center
dual element is using the Boost setting, the power
setting of the center dual element is automatically
reduced to power level 9. To maintain the Boost
setting on the center dual element, use any of the
left-side elements instead.
For safety, after 6 minutes the Boost setting will
automatically revert to either power level 9 or the
previously set power level.
Boost
a
Turning Boost On
Place the cookware on a cooking zone. Activate the
Power Levels popup and press the BOOST key.
WARNING
• Never use the Boost mode to preheat empty
cookware or to heat oil, butter or lard. The
cookware may be damaged and the fat or
grease may catch fire if overheated.
NOTE
• Under certain conditions, the Boost function will
turn off automatically to protect electronic
elements inside the cooktop.
• This can occur if the product is used for long
periods, when frying, or if cookware is lifted or
moved in the Boost mode.
Using the Flexible Cooking Zone
Adjoining cooking zones can be combined to
create one large cooking zone with the Flex
function. This is especially convenient when
cooking in Dutch ovens or other large oblong
pans.
Activating the Flexible Cooking Zone
1
Place the cookware over 2 side cooking zones
and make sure both cooking zones are
activated. The Flex icon will show 2 divided
zones.
NOTE
• If one of the two burners in the Flex Cooking
Zone is functioning, cancel the burner to use the
Flex feature.
2
To merge the 2 cooking zones, press the Flex
icon. The icon will change to show one
combined zone.
3
Select the desired power level.
OPERATION
31
Publicité
