Publicité
EN
I. CONTENT
Elipson keeps to a strict quality control regimen and all factory-sealed products leave
our facility in perfect condition. If there are any damages visible or concealed they
have occurred in handling and must be reported immediately to your Elipson author-
ized dealer.
Carefully remove the loudspeaker from the box, take caution as the size often de-
ceives the actual weight. Save all custom cartons and packaging protection for future
use. They are rather expensive and may come in handy for future upgrades.
THE PACKAGING CONTAINS THE FOLLOWING ITEMS :
1. Acoustic loudspeaker
2. Aluminium grille
3. Cut-out template
WARNING / IMPORTANT TECHNICAL NOTE
PLEASE READ BEFORE OPERATING LOUDSPEAKERS.
The warranty on loudspeakers is void if the voice coils are burned or damaged
as a result of overpowering or clipping.
OVERPOWERING : The volume control of most amplifiers and receivers is a log-
arithmic type, which means that full rated power may be reached with the
volume control as little as the halfway point. In addition, operating the loudness
feature or boosting the treble or bass controls increases power output well be-
yond rated levels.
AS A RESULT OF THE ABOVE FACTORS, A 30-WATT AMPLIFIER CAN PRODUCE DIS-
TORTED OUTPUT LEVELS OF OVER 100 WATT AND MAY DAMAGE YOUR LOUDSPEAKERS.
CLIPPING : Clipping refers to the power level at which an amplifier begins to
distort a waveform by flattening its top and bottom into a square wave-shape.
When fed to tweeters and/or midrange loudspeakers, this may result in ex-
ceeding their maximum power handling capacity, causing damage to the
loudspeaker voice coil.
CLIPPING CAN BE IDENTIFIED BY FUZZ OR DISTORTED SOUND. IF THIS IS HEARD, LOWER
THE VOLUME IMMEDIATELY TO AVOID DAMAGE TO YOUR SYSTEM.
CONTINUOUS CLIPPING WILL DAMAGE OR BURN OUT THE LOUDSPEAKERS.
The Architect IN loudspeakers have been designed to reproduce all types of music
as accurately as possible, provided that a few rules should be followed to optimise
performance and achieve a realistic sound image. Before installing your loudspeak-
ers, you should consider the placement carefully, taking into account the location of
electrical, plumbing and other fixtures. Contact your dealer for assistance if you are
not sure of the best location in your particular room environment.
28
II. STEREO PLACEMENT
IN-WALL PLACEMENT
Ideally, the loudspeakers should be placed symmetrically in front of the listening posi-
tion to form an equilateral triangle. The cabinets should be placed at the same height
and the same height and the same distance from the adjacent side surfaces.
IN-CEILING PLACEMENT
Ideally, the loudspeakers should be placed symmetrically above the listening position,
spaced from about 1m to 3 m. If possible, left and right loudspeakers should be posi-
tioned at the same distance from the listening position.
29
EN
Publicité
