Home Decorators Collection CONNOR 71847 Guide D'utilisation Et D'entretien page 15

Operating Your Fan
Your fan is equipped with a remote control to operate the fan speed
and lights of your new ceiling fan.
The appropriate speed settings for warm or cool weather depends on
factors such as the room size, ceiling height, and number of fans.
The fan is shipped from the factory with the reversing switch
positioned to circulate air downward. If airflow is desired in the
opposite direction, turn your fan off and wait for the blades to stop
turning, then slide the reversing switch (XX) (located in switch cup) to
the opposite position, and turn the fan on again. The fan blades will
turn in the opposite direction and reverse airflow.
NOTE: Wait for the fan to stop before reversing the direction of
the blade rotation.
Warm weather - (Forward) A downward airflow creates a cooling effect.
This allows you to set your air conditioner on a warmer setting without
affecting your comfort.
Cool weather - (Reverse) An upward airflow moves warm air off of the
ceiling. This allows you to set your heating unit on a lower setting
without affecting your comfort.
USING THE REMOTE CONTROL
□
Press the desired button on the remote control (J) to operate the
fan:
□
"1" button: Press to turn the fan on and set the fan speed to
low.
□
"2" button: Press to turn the fan on and set the fan speed to
medium.
□
"3" button: Press to turn the fan on and set the fan speed to
high.
□
Power button: Press to turn the fan off.
□
Light button: Press and release immediately to turn the light
on or off. Press and hold to dim or brighten the bulbs to the
desired level and then release (the dimmer function is for
Tungsten bulbs only).
ON/Low
ON/Medium
K
15
Please contact 1-800-986-3460 for further assistance.
A. Warm weather
B. Cool weather
Power OFF
ON/High
Light ON/OFF
& Dimmer Function
HOMEDEPOT.CA